Skip to main content
Revised November 2026 A guide to non-delegated and hybrid delegated correspondent lending with Pylon, from application to purchase: responsibilities at each stage, document delivery through Command Center, and the name in which each document is issued.

1. Overview

In Pylon’s non-delegated correspondent program, the correspondent (“NDC”) is the lender of record. The correspondent takes the application, closes the loan in its own name and funds the loan through its warehouse line. Pylon underwrites the loan, makes the credit decision and purchases the closed loan. As the underwriter, Pylon runs services tied to the credit decision (AUS, fraud, compliance and flood) in Pylon’s name. Pylon prepares disclosures and the closing package on its platform and issues these documents in the correspondent’s name as lender of record. Pylon also manages appraisals and balances closing figures with title. Section 6 identifies responsibilities at each loan stage and uses the following labels to show the name in which each document is issued:
LabelMeaning
PylonIssued in Pylon’s name.
CorrespondentIssued in the correspondent’s name, whether the correspondent orders it or Pylon prepares it on the correspondent’s behalf.
TransferredOrdered in Pylon’s name and then transferred to the correspondent’s name.
Loans must comply with the Pylon Product guide and overlays and be locked under the Pylon Rate lock policy. Those documents govern matters not addressed here. Hybrid delegated correspondents should also read section 7.

2. Working with Pylon

Contacts

TopicContact
Rate locks and pricingFile a ticket in Command Center.
Scenarios and eligibilityFile a ticket in Command Center. Contact your account manager for urgent items.

Your Pylon team

Pylon’s software handles most fulfillment tasks with human-in-the-loop support. Each loan has an assigned Pylon team, identified in Command Center.
RoleWhat they doWhen you hear from them
Onboarding teamOnboards the correspondent: agreements, company and MERS information, warehouse setup, pricing, Command Center users and training.During onboarding, until the correspondent is cleared to register its first loan.
Account managerOnboards new loan officers after the correspondent launches, provides ongoing training and support, and handles escalations and urgent matters.After launch, when new loan officers join or a loan requires escalation.
UnderwriterPylon underwrites files programmatically. The underwriter works each file as the human in the loop, issues the conditional approval and reviews conditions.From submission through clear-to-close. The correspondent can schedule time with the underwriter. Pylon contacts the correspondent about suspended files.
ClosingPrepares the closing package, schedules closing with title, balances figures and coordinates funding.From clear-to-close until the loan disburses.

How you work with Pylon

Command Center (CC) is Pylon’s correspondent platform for loan data, documents, conditions, submissions, status and support tickets. Some steps currently use email and will move to Command Center over time. All Command Center functions can also be integrated through Pylon’s API and Pylon Elements.
ActivityWhere it happens today
Loan registration, application data and lockingCommand Center
Document uploads (correspondent and borrower)Command Center
Conditions and condition statusCommand Center, with alerts
Lock confirmation, approval, clear-to-close and closing package for the warehouse lenderCommand Center (self-serve)
Questions and requests on a loan (account manager, underwriter, Pylon Closing)Ticket in Command Center
Submissions to underwriting (initial and after conditions)Command Center
Change of circumstance requestsCommand Center request or ticket
Appraisal status and reportCommand Center
Closing dateEntered by the correspondent in Command Center
Closing scheduling and balancing with titleEmail from Pylon Closing, with the correspondent copied
Wire-in and wire-out amounts for fundingCommand Center (beta)
Authorization to disburseEmail from Pylon
Purchase conditions and purchase adviceEmail from Pylon
Note Use Command Center tickets for loan requests that require action. Tickets route to the appropriate Pylon team member and remain in the loan record. Current process Wire-in and wire-out amounts for funding are available in Command Center, currently in beta. Planned enhancement Authorization to disburse, purchase conditions and purchase advice will move to Command Center. Until then, Pylon delivers these items by email.

3. Onboarding with Pylon

The Pylon onboarding team tracks the requirements below and confirms when all are complete and the correspondent may register the first loan.
RequirementDetails
AgreementsSigned Subscription Agreement and Loan Purchase Agreement.
Company and licensing informationLegal name, NMLS ID, state licenses and addresses. Pylon uses these details on disclosures and closing packages issued in the correspondent’s name. Report changes to the account manager before the next package is issued.
Warehouse lender setupWarehouse lender contacts, approval of Pylon as a takeout investor on the warehouse line (if not already approved), the lender’s bailee letter template, all documents required for funding, and any recurring audit or collateral requirements.
MERS informationThe correspondent’s MERS membership type (for example, MERS LITE-R or standard membership) and MERS Org ID. Pylon uses both to generate MERS MINs for the correspondent’s closing packages.
Pricing and concessionsPylon configures the correspondent’s company-level margin during onboarding. The margin applies to every loan the correspondent locks. After onboarding, the correspondent can adjust the margin and set concession limits in Command Center.
Appraisal management companiesThe correspondent may recommend existing AMC partners. Pylon must vet and approve each AMC before adding the company to its appraisal panel.
User access and rolesThe correspondent identifies all users who will need access to Command Center, including LOs, processors, admins, and closing/funding contacts, along with the appropriate access level for each.

Pylon provisions users and confirms which contacts should be included on closing/funding correspondence.

4. Training

TrainingDetails
Set upNamed users are set up in Command Center for each member of the correspondent’s team.
Workflow trainingBefore the first loan is submitted, Pylon’s onboarding team walks the correspondent’s team through the non-delegated workflow in Command Center. Training may be tailored by role, with separate sessions for LOs, processors, admins, and closing/funding teams as needed.

Closing and funding users will have access to the Documents section to retrieve closing packages and other required documents.
Ongoing training and supportAfter launch, the account manager provides ongoing training and support and onboards new loan officers.

5. Loss payee and loan number requirements

RequirementDetails
Loss payeeUnless specifically noted otherwise, the correspondent is named as the loss payee / mortgagee on all insurance documents, as the insured lender on title policies, and as lender on any other applicable documents, followed by its successors and/or assigns.
Loan number (Disclosure ID)The loan number on these documents is the Pylon Disclosure ID, as listed in Command Center.
Note To avoid insurance and title corrections, provide the insurance agent and title company with the correspondent’s exact legal name and the Pylon Disclosure ID when ordering.

6. Workflow by stage

6.1 Application and registration

The correspondent takes the application and registers the loan in Command Center. Starts: borrower application. Ends: loan registered and locked.
Task or documentResponsibleName on documentDetails
Loan application (URLA / 1003)CorrespondentCorrespondentThe correspondent is the lender on the application.
Loan entry in Command CenterCorrespondent—Either import a MISMO 3.4 file from the correspondent’s LOS and complete any missing fields, or enter the application directly in Command Center.
Credit reportCorrespondentCorrespondentThe correspondent pulls the initial report. Pylon reissues hard tri-merge reports from Advantage Credit at loan setup (6.3). Advantage is currently the only supported reissue vendor. Support for additional vendors is planned. For soft pulls or hard pulls from other vendors, Pylon obtains a new report.
Pricing and rate lockBoth—The correspondent locks in Command Center under the Rate lock policy. Pricing includes the correspondent’s company-level margin.
Rate lock confirmationPylonPylonAvailable on the loan in Command Center immediately after the lock.
Note Verify imported loan data before locking. Pricing reflects the loan structure entered. Later changes are repriced under the Rate lock policy.

6.2 Initial disclosures

Pylon prepares and sends the initial disclosures in the correspondent’s name, then tracks signatures and intent to proceed. Starts: complete application in Command Center. Ends: disclosures signed and intent to proceed received. Current process A change of circumstance can start in any of three ways:
  • Command Center request: the correspondent submits the COC on the loan in Command Center with the reason and supporting documentation.
  • Ticket: the correspondent opens a ticket in Command Center to the account manager, who issues the COC.
  • Pylon-identified: Pylon issues the COC itself for changes it finds in the file, such as a reprice after a scenario change, or a property type change after the appraisal comes in.
In every case Pylon reviews the change and issues the revised disclosures in the correspondent’s name.

6.3 Loan setup and submission

The correspondent and Pylon assemble the file and order third-party services. Documents are submitted through Command Center or the borrower platform. Starts: intent to proceed. Ends: file moved to underwriting.

Provided by the correspondent

Ordered by Pylon

Current process Appraisals. Pylon orders the appraisal after receiving intent to proceed, in the correspondent’s name where possible. If ordered in Pylon’s name, Pylon transfers the appraisal to the correspondent when necessary and provides a transfer letter. The appraisal fee is collected at closing. Command Center displays the status, report and AMC communications as received. The AMC sends the borrower a separate notice to satisfy appraisal delivery requirements. Pylon manages all orders, corrections and revisions. The correspondent should not order a separate appraisal or contact the AMC or appraiser directly.

Submission to underwriting

Note There is no fixed submission checklist. Submit after receiving intent to proceed and the documents needed for a credit decision. Correct documents rejected at upload before submitting. The agentic underwriter returns files missing critical items.

6.4 Underwriting

Pylon underwrites the loan and makes the credit decision. Starts: file submitted to underwriting. Ends: conditional approval or suspense posted.

6.5 Conditional approval and conditions

The correspondent gathers documents to satisfy underwriting conditions. Pylon reviews the documents and clears satisfied conditions. Starts: conditional approval. Ends: clear-to-close. Note Uploading condition documents does not return the file to underwriting. After uploading documents for all conditions you can satisfy, resubmit in Command Center. Submit conditions together for the fastest review.

6.6 Closing

The correspondent enters the closing date in Command Center. Pylon Closing prepares the closing package in the correspondent’s name and coordinates with title, copying the correspondent on all scheduling and balancing emails. Starts: clear-to-close. Ends: loan signed and funding documents reviewed. Current process Closing scheduling, balancing and title coordination are currently handled by email. Pylon copies the correspondent on these threads so the correspondent can provide context or corrections directly to Pylon and title. Planned enhancement Support for eClosings and remote online notarization (RON) is planned for a future release. Note Check your warehouse lender’s funding requirements early. Everything Pylon provides for the warehouse lender is available in Command Center as soon as it is issued.

6.7 Funding

Pylon reviews the funding package and clears funding conditions. The correspondent funds the loan from its warehouse line, and Pylon authorizes disbursement. Starts: funding documents reviewed. Ends: loan disbursed. Current process Wire-in and wire-out amounts are available in Command Center, currently in beta. The authorization to disburse is sent by email from Pylon Closing. Planned enhancement The authorization to disburse will be posted in Command Center.

6.8 Post-closing and purchase

The correspondent delivers the original Note and collateral, usually through its warehouse lender under a bailee letter. Pylon already holds the full loan and funding packages, so no separate closed loan file is required. Starts: loan disbursed. Ends: loan purchased by Pylon and MERS transfer complete. Current process Purchase conditions and the purchase advice are emailed by Pylon. Planned enhancement Purchase conditions and the purchase advice will be delivered in Command Center.

7. Hybrid delegated option

Eligible correspondents may apply for hybrid delegated status. Loans follow the workflow and document responsibilities in section 6: Pylon underwrites loans and issues conditions through Command Center, and documents are issued in the names listed in section 6 and Exhibit A. Hybrid delegated status gives the correspondent authority to waive Pylon requirements and assigns the resulting risk to the correspondent, as described below.

Eligibility

Waiver authority

Effect of a waiver

Non-delegated and hybrid delegated compared

8. Frequently asked questions

Why are some documents in Pylon’s name instead of ours? Pylon runs services tied to the credit decision (AUS, fraud, compliance, flood and MI) in Pylon’s name. Disclosures and closing packages are issued in the correspondent’s name as lender of record. Pylon will handle additional documents as workflows are automated. Exhibit A lists the documents and the name in which each is issued. Do we need to order an appraisal? No. Pylon orders and manages all appraisals, corrections and revisions. To use an existing AMC partner, ask the onboarding team to arrange review for Pylon’s appraisal panel. How do we request a reconsideration of value (ROV)? Open a ticket in Command Center at any time. The borrower can also request one through the link in the appraisal delivery email. Pylon manages the ROV with the AMC. Who sends disclosures to the borrower? Pylon sends disclosures by eSign in your name, tracks signatures and collects intent to proceed. Pylon asks you to follow up with the borrower on missing signatures. How does a loan get to underwriting? Submit the file in Command Center. Loans do not advance automatically. Pylon’s agentic underwriter may return incomplete files or files missing critical documents, with an explanation. Use the same process to resubmit after addressing conditions. How do we ask our Pylon team a question about a loan? Open a Command Center ticket for loan requests that require action. You can also schedule a human-in-the-loop call with your account manager, underwriter or Pylon Closing. What do we send our warehouse lender, and where do we get it? The lock confirmation, approval, clear-to-close and final closing package are posted in Command Center for you to download and forward. How do we find out how much to wire? After final figures are balanced, Pylon posts the net wire amount and wire details in Command Center (beta), and Pylon Closing confirms the details by email. Verify the amount against the final Closing Disclosure before releasing the wire. Send the wire reference number to title and Pylon after issuance. Do we need to send a closed loan file after funding? No. Pylon already has the full loan and funding packages. Deliver the original Note (with allonge if used), the warehouse lender’s bailee letter and any collateral or post-closing items Pylon asks for. Can a loan close electronically or by remote online notarization? Not yet. eClosings (full or hybrid), eNotes and RON are not currently supported. Support is planned for a future release. All loans currently close in person with wet-ink signatures. Do we service the loan before Pylon purchases it? No. Pylon purchases the loan before the first payment date. You are not expected to provide interim servicing, but all applicable servicing transfer letter requirements still apply.