> ## Documentation Index
> Fetch the complete documentation index at: https://docs.pylon.mortgage/llms.txt
> Use this file to discover all available pages before exploring further.

# Product Guide and Overlays

> Agency conforming, high balance, adjustable-rate and AUS Jumbo products offered by Pylon, and every place Pylon's requirements go beyond the Agency guides.

*Revised November 2026*

Agency conforming, high balance, adjustable-rate and AUS Jumbo products offered by Pylon, and every place Pylon's requirements go beyond the Agency guides. Where this guide is silent, the Fannie Mae Selling Guide, the Freddie Mac Single-Family Seller/Servicer Guide and the loan's AUS findings govern.

Pylon's buy box: [Pylon's Buy Box Overview](https://pylonlending.support.site/article/pylons-buybox-overview).

## 1. Overview

This guide sets out the products Pylon offers and the places where Pylon's requirements are more restrictive than, or require more than, the Agency guides. It is not a restatement of the Agency guides. A loan must meet the Agency guide, its AUS findings and every overlay in this guide that applies to it.

The Applicable column in each table shows when a requirement applies:

<table>
  <colgroup>
    <col width="190" />

    <col width="706" />
  </colgroup>

  <thead>
    <tr>
      <th />

      <th />
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Always</td>
      <td>Applies to every loan in the product or section where it appears.</td>
    </tr>

    <tr>
      <td>Investor specific</td>
      <td>Applies depending on the investor the loan is delivered to. Where investors differ, the most restrictive requirement is shown. Pylon confirms at underwriting whether it applies to a given loan.</td>
    </tr>

    <tr>
      <td>*Planned enhancement*</td>
      <td>Marks a current limitation that Pylon expects to remove in a future update.</td>
    </tr>

    <tr>
      <td>Order of precedence</td>
      <td>1. This guide (most restrictive governs)\
      2\. AUS findings (DU or LPA)\
      3\. Fannie Mae Selling Guide or Freddie Mac Seller/Servicer Guide, matching the AUS used</td>
    </tr>

    <tr>
      <td>Exceptions</td>
      <td>Exceptions to overlays in this guide are not permitted unless stated. Where a program allows a single-loan variance (section 6), the request must be approved before the loan is locked or submitted to underwriting.</td>
    </tr>

    <tr>
      <td>Changes</td>
      <td>Overlays may change at any time. The version in effect on the date the loan is submitted to underwriting applies. Material changes are announced to approved brokers and correspondents.</td>
    </tr>

    <tr>
      <td>Agreement specific</td>
      <td>Applies only if stated in the applicable agreement</td>
    </tr>
  </tbody>
</table>

## 2. Working with Pylon

**Command Center (CC)** is Pylon's platform. It is where loan data, documents, conditions, submissions and status live, and where you open tickets with your Pylon team. In addition to the web-based platform, everything in Command Center can be integrated through Pylon's API and Pylon Elements.

<table>
  <colgroup>
    <col width="248" />

    <col width="664" />
  </colgroup>

  <thead>
    <tr>
      <th />

      <th />
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Rate locks and pricing</td>
      <td>File a ticket in Command Center. Locks are placed in Command Center under the Pylon [Rate lock policy](https://docs.pylon.mortgage/rate-lock-policy.md).</td>
    </tr>

    <tr>
      <td>Scenarios and eligibility</td>
      <td>File a company-level ticket in Command Center. Scenario tickets are assigned to your account manager.</td>
    </tr>

    <tr>
      <td>Questions on a registered loan</td>
      <td>File a ticket on the loan in Command Center. Tickets reach your account manager, underwriter or Pylon Closing and stay on the loan's record.</td>
    </tr>

    <tr>
      <td>Urgent items</td>
      <td>Contact your account manager.</td>
    </tr>
  </tbody>
</table>

> [!NOTE]
>
> Use a ticket in Command Center, not email, for anything that needs action. You can also schedule a human-in-the-loop call with your account manager, underwriter or Pylon Closing.

## 3. Products at a glance

The program names below are the names shown in Command Center when a loan is priced and locked.

| Product | Program in Command Center | Amortization and terms | Loan amount | AUS |
| - | - | - | - | - |
| Fannie Mae conforming | Fannie Mae Conforming | Fixed: 15, 20 and 30 years | Up to the FHFA baseline limit | DU Approve/Eligible |
| Freddie Mac conforming | Freddie Mac Conforming | Fixed: 15, 20 and 30 years | Up to the FHFA baseline limit | LPA Accept/Eligible |
| HomeReady / Home Possible | Fannie Mae / Freddie Mac Conforming | Fixed: 15, 20 and 30 years | Per Agency program limits | DU or LPA, eligible |
| High balance | Fannie Mae / Freddie Mac Conforming | Fixed: 15, 20 and 30 years | Above baseline, up to the county high-cost limit | DU or LPA, eligible |
| Conforming ARMs | Fannie Mae / Freddie Mac Conforming 5/6, 7/6, 10/6 ARM | 30-year SOFR ARM: 5/6, 7/6 and 10/6 | Up to the FHFA baseline limit | DU or LPA, eligible |
| High balance ARMs | Fannie Mae / Freddie Mac Conforming 5/6, 7/6, 10/6 ARM | 30-year SOFR ARM: 5/6, 7/6 and 10/6 | Above baseline, up to the county high-cost limit | DU or LPA, eligible |
| AUS Jumbo | See section 6 | Fixed: 15, 20 and 30 years, subject to program | \$1 above the county limit up to the program maximum | DU Approve/Ineligible or LPA Accept/Ineligible for loan amount only |

Loan limits are those published by FHFA for the year of the note date and the subject county. **Product limitations:** Pylon does not currently offer government loans (FHA, VA, USDA), down payment assistance or grant programs, Agency special programs other than HomeReady and Home Possible, Energy Efficient Mortgages, renovation loans, single-close construction-to-permanent loans, manufactured homes, 3/6 SOFR ARMs, convertible or interest-only ARMs, AUS Jumbo ARMs, fixed-rate terms other than 15, 20 and 30 years, manual underwriting, or eClosings and RON.

## 4. Overlays that apply to all products

These overlays apply to every conforming, high balance, ARM and AUS Jumbo loan. Product-specific requirements are in sections 5 and 6.

### Underwriting and credit

<table>
  <colgroup>
    <col width="325" />

    <col width="190" />

    <col width="400" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Applicable</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>AUS</td>
      <td>Always</td>
      <td>Every loan must be run through DU or LPA. Agency loans require Approve/Eligible (DU) or Accept/Eligible (LPA). Refer/Caution and Refer with Caution findings are not eligible.</td>
    </tr>

    <tr>
      <td>Manual underwriting</td>
      <td>Always</td>
      <td>Not offered on any product, including loans the Agency guides would allow to be manually underwritten.</td>
    </tr>

    <tr>
      <td>Non-QM characteristics</td>
      <td>Always</td>
      <td>A loan with DTI over 50%, a balloon payment, high-cost status, or bankruptcy or foreclosure seasoning under 3 years is treated as non-QM and is not eligible for any product in this guide.</td>
    </tr>

    <tr>
      <td>Credit score</td>
      <td>Always</td>
      <td>Minimum 650 representative credit score on every loan (purchase, rate/term and cash-out). Program minimums in sections 5 and 6 and Pylon's buy box may be higher. Loans where any borrower has no credit score are ineligible unless the loan receives a valid AUS recommendation.</td>
    </tr>

    <tr>
      <td>VantageScore 4.0</td>
      <td>Always\
      *Planned enhancement*</td>
      <td>VantageScore 4.0 credit scores are not yet accepted. Support is planned for a future update (section 9).</td>
    </tr>

    <tr>
      <td>Income starting after the Note date</td>
      <td>Always</td>
      <td>When qualifying income starts after the Note date, the required post-closing documentation (such as the first paystub) must be obtained after closing and before the first payment date.</td>
    </tr>

    <tr>
      <td>Tax transcripts</td>
      <td>Always</td>
      <td>The most recent one year of personal IRS tax transcripts is required when handwritten paystubs are used to verify income, or when the borrower is employed by a family member.</td>
    </tr>

    <tr>
      <td>Non-resident and non-permanent resident aliens</td>
      <td>Always</td>
      <td>Maximum 65% LTV/CLTV on every loan that is not AUS-eligible, including all AUS Jumbo loans. Agency-eligible loans follow AUS and the Agency guide.</td>
    </tr>
  </tbody>
</table>

### Property and title

<table>
  <colgroup>
    <col width="301" />

    <col width="190" />

    <col width="422" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Applicable</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Ineligible geographies and tribal lands</td>
      <td>Always</td>
      <td>Properties in Puerto Rico, Guam, the U.S. Virgin Islands and the Commonwealth of the Northern Mariana Islands are ineligible; AUS Jumbo programs add American Samoa and other territories (section 6). Properties on Indian reservations or Native American tribal lands that are also subject to tribal governance requirements are ineligible.</td>
    </tr>

    <tr>
      <td>Land trusts</td>
      <td>Always\
      *Planned enhancement*</td>
      <td>Community land trusts and all other land trust vestings (including Illinois land trusts) are ineligible.</td>
    </tr>

    <tr>
      <td>Vesting in a trust</td>
      <td>Always\
      *Planned enhancement*</td>
      <td>Title may vest in no more than one inter vivos revocable trust. Loans with title vested in two or more trusts are not eligible.</td>
    </tr>

    <tr>
      <td>Vesting in an entity</td>
      <td>Always</td>
      <td>Vesting in an LLC, corporation, partnership or other entity is not permitted. Title must vest in the individual borrower(s) or one eligible trust.</td>
    </tr>

    <tr>
      <td>Manufactured homes</td>
      <td>Always\
      *Planned enhancement*</td>
      <td>Not currently supported, including MH Advantage, CHOICEHome and manufactured home condominium projects. Support is planned for a future update.</td>
    </tr>

    <tr>
      <td>Co-operatives</td>
      <td>Always</td>
      <td>Co-op share loans are ineligible on every product, including AUS Jumbo.</td>
    </tr>

    <tr>
      <td>Appraisal risk scores</td>
      <td>Always</td>
      <td>Loans with a CU or LCA score of 5.0 are ineligible. Scores of 4.0 to 4.9 are subject to an AVM, and additional valuation documentation may be required if the AVM does not support value.</td>
    </tr>
  </tbody>
</table>

### Programs and transactions

<table>
  <colgroup>
    <col width="325" />

    <col width="190" />

    <col width="394" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Applicable</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Down payment assistance and secondary financing</td>
      <td>Always\
      *Planned enhancement*</td>
      <td>Not offered: down payment assistance and grants, Community Seconds and Affordable Seconds, shared appreciation or shared equity financing, properties with deed or resale restrictions, and affordable LTV calculations on a subsidized sales price (section 3). Piggyback (combination first and second lien) structures are not currently supported.</td>
    </tr>

    <tr>
      <td>Minimum loan amount</td>
      <td>Always</td>
      <td>\$40,000.</td>
    </tr>

    <tr>
      <td>3/6 SOFR ARMs</td>
      <td>Always</td>
      <td>Not offered.</td>
    </tr>

    <tr>
      <td>Temporary buydowns</td>
      <td>Always</td>
      <td>Permitted only on 30-year terms, with a minimum 660 credit score. Not permitted on terms under 30 years.</td>
    </tr>

    <tr>
      <td>Single-close construction-to-permanent</td>
      <td>Always\
      *Planned enhancement*</td>
      <td>Single-close (one-time close) construction-to-permanent programs are not offered (section 9).</td>
    </tr>

    <tr>
      <td>Sales contract and chain of title</td>
      <td>Always</td>
      <td>Assignments of the sales contract are not permitted. Double escrows are not permitted.</td>
    </tr>
  </tbody>
</table>

### Mortgage insurance, escrow and closing

<table>
  <colgroup>
    <col width="265" />

    <col width="190" />

    <col width="457" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Applicable</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Lender-paid mortgage insurance</td>
      <td>Always</td>
      <td>Single premium only. Monthly and annual LPMI are not permitted.</td>
    </tr>

    <tr>
      <td>Escrow waivers</td>
      <td>Always</td>
      <td>Permitted only up to 80% LTV.</td>
    </tr>

    <tr>
      <td>Interest credits</td>
      <td>Always</td>
      <td>Interest credits at closing are permitted through the 7th calendar day of the month.</td>
    </tr>

    <tr>
      <td>Closing method</td>
      <td>Always\
      *Planned enhancement*</td>
      <td>All closing documents are signed in person, with wet ink, before a notary. eClosings (full or hybrid), eNotes and RON are not currently supported. Support is planned for a future update.</td>
    </tr>
  </tbody>
</table>

## 5. Agency conforming and high balance

Fannie Mae and Freddie Mac loans underwritten to DU or LPA and the matching Agency guide. High balance loans follow the same requirements, with the Agency's high balance eligibility limits. Every overlay in section 4 applies.

### 5.1 Adjustable-rate (SOFR ARMs)

30-year SOFR adjustable-rate mortgages underwritten to DU or LPA, at conforming and high balance loan amounts.

| Feature | 5/6 SOFR ARM | 7/6 SOFR ARM | 10/6 SOFR ARM |
| - | - | - | - |
| Term | 30 years | 30 years | 30 years |
| Index | 30-day average SOFR | 30-day average SOFR | 30-day average SOFR |
| Initial fixed period | 60 months | 84 months | 120 months |
| Adjustment frequency | Every 6 months | Every 6 months | Every 6 months |
| Caps (initial / periodic / lifetime) | 2 / 1 / 5 | 5 / 1 / 5 | 5 / 1 / 5 |
| Periodic cap (increase / decrease) | 1% / 1% | 1% / 1% | 1% / 1% |
| Lifetime ceiling | Note rate + 5% | Note rate + 5% | Note rate + 5% |
| Floor | Margin | Margin | Margin |
| Margin | Per rate lock | Per rate lock | Per rate lock |
| Index lookback | 45 days before change date | 45 days before change date | 45 days before change date |
| Rounding | Nearest 1/8% | Nearest 1/8% | Nearest 1/8% |
| Qualifying rate | Greater of note rate + 2% or fully indexed rate | Greater of note rate or fully indexed rate | Greater of note rate or fully indexed rate |

<table>
  <colgroup>
    <col width="234" />

    <col width="145" />

    <col width="505" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Applicable</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Occupancy and transactions</td>
      <td>Agency</td>
      <td>Per Agency guide.</td>
    </tr>

    <tr>
      <td>Products not offered</td>
      <td>Always</td>
      <td>3/6 SOFR ARMs (section 4), convertible ARMs and interest-only ARMs.</td>
    </tr>

    <tr>
      <td>Execution</td>
      <td>Investor specific</td>
      <td>ARMs are delivered through select executions only.</td>
    </tr>

    <tr>
      <td>Temporary buydowns</td>
      <td>Investor specific</td>
      <td>Not permitted on ARMs.</td>
    </tr>

    <tr>
      <td>HPML ARMs</td>
      <td>Investor specific</td>
      <td>HPML ARMs are not eligible.</td>
    </tr>

    <tr>
      <td>Margin</td>
      <td>Always</td>
      <td>Set by the rate lock. The margin on the loan must match the lock confirmation.</td>
    </tr>
  </tbody>
</table>

> [!NOTE]
>
> **Qualifying example.** Fully indexed rate = index + margin, rounded to the nearest 1/8% (for example 3.625% + 2.75% = 6.375%). With a 6.50% note rate, a 7/6 or 10/6 qualifies at 6.50% and the same loan as a 5/6 qualifies at 8.50% (6.50% + 2%). The lifetime ceiling is 11.50%.

## 6. Jumbo programs

Jumbo programs use Agency AUS findings (Approve/Ineligible or Accept/Ineligible for loan amount only) with each program's own eligibility and overlays. Where a program is silent, DU loans default to the Fannie Mae Selling Guide and LPA loans to the Freddie Mac guide. Manual underwriting is not permitted, and AUS Jumbo ARMs are not offered. Every overlay in section 4 applies.

### Programs at a glance

| | Pylon x BAML | Pylon x Bayview | Pylon x Bayview Plus | Pylon x Citi | Pylon x PennyMac |
| - | - | - | - | - | - |
| AUS | DU or LPA | DU only | DU only | DU only | DU or LPA |
| Min loan | \$1 over limit | \$1 over limit | \$300,000 (HB permitted) | \$1 over limit by units | \$1 over baseline |
| Max loan (primary purchase) | \$3,500,000 | \$3,000,000 | \$2,500,000 | Per matrix | \$3,500,000 |
| Max DTI | Per DTI matrix | 49.99% (30-yr) | 49.99% | 50% | 50% / 45% |
| BK seasoning | 7 yrs | 7 yrs | Per Fannie Mae | 5 yrs | 7 yrs |
| Foreclosure | 7 yrs | 7 yrs | Per Fannie Mae | 7 yrs | 7 yrs |
| Max cash-out | \$500,000 | No limit (30-yr) | No limit | Per matrix | \$500,000 |
| Investment | No | Yes | Yes | Yes | Yes |
| Non-occupant co-borrower | Yes | Family only | Family only | No | Yes, related |
| Non-permanent resident | No | Primary only; 65% LTV | Primary only; 65% LTV | Yes; 65% LTV | Yes; 65% LTV |
| Exceptions | None | Single-loan variance | Single-loan variance | None | None |

> [!NOTE]
>
> **Buy box.** Every AUS Jumbo loan must also fall inside Pylon's buy box: maximum 80% CLTV, 50% DTI, 680 minimum credit score and \$5,000,000 maximum loan amount. Loans over \$5,000,000 or outside these limits need prior credit approval. Non-resident and non-permanent resident alien borrowers are limited to 65% LTV/CLTV on every AUS Jumbo program. See Pylon's [Buy Box Overview](https://pylonlending.support.site/article/pylons-buybox-overview).

### 6.1 Pylon x BAML

Primary and second home jumbo with conservative credit and two-appraisal requirements above \$2,000,000. No exceptions.

<table>
  <colgroup>
    <col width="153" />

    <col width="697" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>AUS</td>
      <td>DU or LPA. Loans \$1 above the conforming or high balance limit require Approve/Ineligible (or Accept/Ineligible) for loan amount only. Where silent, default to Fannie Mae (DU) or Freddie Mac (LPA).</td>
    </tr>

    <tr>
      <td>Loan amounts</td>
      <td>Purchase and rate/term: \$1 above the conforming limit to \$3,500,000\
      Cash-out: \$1 above the conforming limit to \$2,000,000\
      2-unit max \$1,500,000; 3–4 unit max \$1,000,000</td>
    </tr>

    <tr>
      <td>DTI</td>
      <td>Per program DTI matrix **Confirm**. Cryptocurrency is not eligible as income.</td>
    </tr>

    <tr>
      <td>Reserves</td>
      <td>≤ \$1,500,000: 6 months PITI\<br />\$1,500,001–\$2,000,000: 9 months\<br />> \$2,000,000: 24 months\
      Cryptocurrency is not eligible for reserves.</td>
    </tr>

    <tr>
      <td>Credit</td>
      <td>Minimum two scores per borrower; lower of two or middle of three.</td>
    </tr>

    <tr>
      <td>Derogatory credit</td>
      <td>Bankruptcy (7, 11, 13) and multiple bankruptcies: 7 years from discharge or dismissal\
      Foreclosure: 7 years; extenuating circumstances do not apply\
      Short sale, deed-in-lieu, pre-foreclosure: 7 years\
      Extenuating circumstances (BK, short sale, DIL): 4 years for loans \< \$1,000,000; 7 years for loans ≥ \$1,000,000</td>
    </tr>

    <tr>
      <td>Appraisal</td>
      <td>Full appraisal required; waivers and exterior-only appraisals are not eligible\
      ≤ \$2,000,000: one full appraisal; > \$2,000,000: two full appraisals\
      CDA or field review required on all loans; 2–4 units require a field review</td>
    </tr>

    <tr>
      <td>Property</td>
      <td>SFR and PUD (attached and detached), low- and high-rise condominiums, 2–4 units\
      Max 50 acres; > 20 to 50 acres reduces max LTV/CLTV by 10%\
      Agricultural zoning only if the land is not suited for farming, zoning permits residential use and allows one home on one acre or less</td>
    </tr>

    <tr>
      <td>Occupancy</td>
      <td>Primary residence and second home. Investment property is not eligible.</td>
    </tr>

    <tr>
      <td>Cash-out</td>
      <td>Maximum \$500,000 cash in hand. Borrower must have owned the property at least 6 months.</td>
    </tr>

    <tr>
      <td>Borrowers</td>
      <td>Permanent resident aliens with a valid SSN. Non-permanent resident aliens are not eligible. Non-occupant co-borrowers are eligible.</td>
    </tr>

    <tr>
      <td>Geographic</td>
      <td>Maine: not eligible. Texas: cash-out not eligible.</td>
    </tr>

    <tr>
      <td>Features</td>
      <td>Assumable and convertible features are not eligible.</td>
    </tr>
  </tbody>
</table>

### 6.2 Pylon x Bayview

Full-documentation jumbo for primary, second home and investment, using DU findings. Single-loan variances considered.

<table>
  <colgroup>
    <col width="288" />

    <col width="566" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>AUS</td>
      <td>DU only. Approve/Ineligible for loan amount (or max cash-out on rate/term) only. Approve/Eligible accepted for 15-year fixed down to \$600,000 and high balance amounts. Delegated underwriting only.</td>
    </tr>

    <tr>
      <td>Loan amounts (purchase, rate/term)</td>
      <td>Primary: up to \$3,000,000 (15-year: \$2,000,000)\
      Second home: up to \$2,500,000 (30-year only)\<br />Investment: up to \$1,500,000 (30-year only)\
      First-time homebuyer: up to \$1,500,000 (15-year: \$1,250,000)</td>
    </tr>

    <tr>
      <td>Loan amounts (cash-out)</td>
      <td>Primary: up to \$2,500,000 (15-year: \$2,000,000)\
      Second home: up to \$2,000,000\<br />Investment: up to \$1,500,000</td>
    </tr>

    <tr>
      <td>DTI</td>
      <td>30-year fixed: 49.99%\
      15-year fixed: 43%; 40% when credit score is 700–719</td>
    </tr>

    <tr>
      <td>Reserves</td>
      <td>Primary: ≤ \$1M 6 mo; ≤ \$1.5M 9 mo; ≤ \$2M 12 mo; ≤ \$3M 24 mo\
      Second home: ≤ \$1M 12 mo; ≤ \$1.5M 18 mo; ≤ \$2.5M 24 mo\<br />Investment: ≤ \$1M 18 mo; ≤ \$1.5M 24 mo\<br />First-time homebuyer: ≤ \$1M 12 mo; ≤ \$1.5M 15 mo\
      Plus 6 months PITIA for each other financed 1–4 unit property. Borrowed funds are not eligible.</td>
    </tr>

    <tr>
      <td>Credit</td>
      <td>Two scores per borrower from unfrozen bureaus; non-traditional credit not allowed; disputed tradelines included in DTI unless the dispute is documented; rapid rescores permitted.</td>
    </tr>

    <tr>
      <td>Derogatory credit</td>
      <td>Bankruptcy (7, 11, 13): 7 years\
      Foreclosure and notice of default: 7 years\
      Short sale and deed-in-lieu: 7 years</td>
    </tr>

    <tr>
      <td>Appraisal</td>
      <td>Full appraisal regardless of DU; no waivers; transferred appraisals not allowed\
      CDA (Clear Capital) or CCA XP (Consolidated Analytics) required; CU ≤ 2.5 accepted in lieu on 30-year fixed up to \$1,500,000\<br />Variance > 10% or indeterminate: BPO with value reconciliation, or field review / second appraisal (lower value used)\<br />Two appraisals: purchase > \$2,000,000; refinance > \$1,500,000</td>
    </tr>

    <tr>
      <td>Property</td>
      <td>1–4 unit primary, 1-unit second home, 1–4 unit investment; Fannie Mae warrantable condos (Florida new construction: full review or PERS); modular; PUDs\
      Max 40 acres; > 10 acres: max 35% land value and no income-producing attributes\
      Existing oil/gas leases permitted with title endorsement, no active drilling and public water</td>
    </tr>

    <tr>
      <td>Investment property</td>
      <td>Not eligible with 15-year fixed, first-time homebuyers or asset depletion.</td>
    </tr>

    <tr>
      <td>Financed properties</td>
      <td>30-year: per Fannie Mae. 15-year: max 5 residential properties owned including subject.</td>
    </tr>

    <tr>
      <td>Cash-out</td>
      <td>30-year fixed: no maximum. 15-year fixed: max \$500,000. Rate/term cash back max 1% of loan amount.</td>
    </tr>

    <tr>
      <td>Gifts</td>
      <td>Permitted after 5% borrower contribution. Not permitted for reserves.</td>
    </tr>

    <tr>
      <td>Business funds</td>
      <td>Not for reserves. 3-month cash flow analysis; no NSFs or overdrafts; \< 100% ownership requires 51%+ ownership, access letter and pro-rata use.</td>
    </tr>

    <tr>
      <td>Asset depletion</td>
      <td>Primary 1–2 unit and second home only; minimum \$1,000,000 net eligible assets; income = net eligible assets / 240; not combined with employment income of the account holder; two years of returns and transcripts.</td>
    </tr>

    <tr>
      <td>RSU income</td>
      <td>Two-year history; vesting continuance of two years; lower of current price or 52-week average; RSU and sign-on income capped at 50% of qualifying income; entered in DU as bonus income.</td>
    </tr>

    <tr>
      <td>Departing residence</td>
      <td>Rental income from a departing residence is not permitted on 15-year fixed.</td>
    </tr>

    <tr>
      <td>HELOC on rate/term</td>
      <td>First-lien HELOC must be purchase-money or seasoned 12 months with draws ≤ \$2,000 in the last 12 months.</td>
    </tr>

    <tr>
      <td>Borrowers</td>
      <td>Permanent resident aliens: 24 months U.S. employment. Non-permanent resident aliens: primary residence only. Non-occupant co-borrower must be a related family member.</td>
    </tr>

    <tr>
      <td>Geographic</td>
      <td>Properties outside the 50 states and D.C. (including Guam, Puerto Rico, U.S. Virgin Islands, Northern Mariana Islands, American Samoa) are not eligible.</td>
    </tr>

    <tr>
      <td>Exceptions</td>
      <td>Single-loan variances considered case by case, including credit events between 4 and 7 years with extenuating circumstances and some non-arm's-length transactions. Approval required before lock.</td>
    </tr>
  </tbody>
</table>

### 6.3 Pylon x Bayview Plus

Expanded jumbo with lower minimum loan amounts, non-warrantable condominiums and Fannie Mae credit-event seasoning. 30-year fixed only.

<table>
  <colgroup>
    <col width="325" />

    <col width="528" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>AUS</td>
      <td>DU only. Approve/Ineligible for loan amount (or max cash-out on rate/term) only; Approve/Eligible accepted on loan amounts down to \$300,000 and high balance. Delegated underwriting only.</td>
    </tr>

    <tr>
      <td>Loan amounts</td>
      <td>Minimum \$300,000; high balance permitted\<br />Purchase and rate/term: primary SFR \$2,500,000; primary 2–4 unit \$2,000,000; second home \$2,000,000; investment 1–4 unit \$1,500,000\<br />Cash-out: primary SFR \$1,000,000 **Confirm**; primary 2–4 unit \$2,000,000; second home \$1,500,000; investment \$1,500,000\<br />First-time homebuyer: max \$1,500,000</td>
    </tr>

    <tr>
      <td>DTI</td>
      <td>Up to 49.99%. DTI > 45% requires a 700 minimum score and 6 months reserves.</td>
    </tr>

    <tr>
      <td>Reserves</td>
      <td>Primary: ≤ \$1M 3 mo (score ≥ 700) or 6 mo; ≤ \$1.5M 6 mo; ≤ \$2M 9 mo; ≤ \$3M 12 mo\
      Second home: ≤ \$1M 6 mo; ≤ \$1.5M 12 mo; ≤ \$2M 18 mo\<br />Investment: ≤ \$1M 6 mo; ≤ \$1.5M 12 mo\<br />First-time homebuyer: ≤ \$1M 6 mo; ≤ \$1.5M 9 mo\
      Plus 6 months PITIA for each other financed 1–4 unit property.</td>
    </tr>

    <tr>
      <td>Credit</td>
      <td>As Pylon x Bayview.</td>
    </tr>

    <tr>
      <td>Derogatory credit</td>
      <td>Per Fannie Mae Selling Guide.</td>
    </tr>

    <tr>
      <td>Appraisal</td>
      <td>As Pylon x Bayview (CU ≤ 2.5 in lieu of CDA up to \$1,500,000, no term restriction).</td>
    </tr>

    <tr>
      <td>Property</td>
      <td>As Pylon x Bayview, plus non-warrantable condominiums per program requirements.</td>
    </tr>

    <tr>
      <td>Investment property</td>
      <td>Not eligible with non-arm's-length transactions, first-time homebuyers or asset depletion.</td>
    </tr>

    <tr>
      <td>Cash-out</td>
      <td>No maximum cash-out. Rate/term: loan amount limited to payoff of first lien, seasoned subordinate liens, closing costs and prepaids; cash back max 1%; unused HELOCs must be closed.</td>
    </tr>

    <tr>
      <td>Gifts, business funds, asset depletion, RSU</td>
      <td>As Pylon x Bayview.</td>
    </tr>

    <tr>
      <td>Borrowers</td>
      <td>As Pylon x Bayview; non-permanent resident aliens also need 24 months U.S. employment.</td>
    </tr>

    <tr>
      <td>Geographic</td>
      <td>As Pylon x Bayview.</td>
    </tr>

    <tr>
      <td>Exceptions</td>
      <td>Single-loan variances considered case by case; approval required before lock.</td>
    </tr>
  </tbody>
</table>

### 6.4 Pylon x Citi

DU-based jumbo with loan amounts to the program matrix, 5-year bankruptcy seasoning and strict tradeline and gift requirements. No exceptions.

<table>
  <colgroup>
    <col width="177" />

    <col width="710" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>AUS</td>
      <td>DU only. Approve/Ineligible for loan amount only. Where silent, the Fannie Mae Selling Guide governs; where this program is more restrictive, it governs.</td>
    </tr>

    <tr>
      <td>Loan amounts</td>
      <td>Minimum \$1 above the conforming (baseline or high-cost) limit for the unit count. Maximum per program matrix. 2026 FHFA limits: baseline \$832,750 (1 unit), \$1,066,250 (2 units), \$1,288,800 (3 units), \$1,601,750 (4 units); high-cost areas up to \$1,249,125, \$1,599,375, \$1,933,200 and \$2,402,625.</td>
    </tr>

    <tr>
      <td>DTI</td>
      <td>Maximum 50%. Installment debts must be paid in full to be excluded; \< 10 payments may be excluded only if the payment is under 5% of qualifying income.</td>
    </tr>

    <tr>
      <td>Reserves</td>
      <td>Primary purchase / rate/term: 1-unit ≤ \$3M 6 mo, ≤ \$5M 12 mo; 2–4 unit ≤ \$3M 12 mo; cash-out 9 mo\<br />Second home: ≤ \$3M 9 mo; ≤ \$5M 12 mo; cash-out 9 mo\
      Investment: 12 mo\
      Plus 2 months PITIA per other financed residential property. Securities at 70%, retirement at 60%.</td>
    </tr>

    <tr>
      <td>Credit</td>
      <td>Lowest representative score of all borrowers. Each qualifying borrower needs 3 tradelines: one open 24+ months, two open 12+ months.</td>
    </tr>

    <tr>
      <td>Derogatory credit</td>
      <td>Bankruptcy: 5 years (7 years with multiple bankruptcies)\
      Foreclosure: 7 years\
      Deed-in-lieu: 5 years\
      Letter of explanation required for all events</td>
    </tr>

    <tr>
      <td>Appraisal</td>
      <td>≤ \$2,000,000: one full appraisal with 1004MC plus enhanced desk review (CDA recommended)\<br />> \$2,000,000: two full appraisals from independent companies; lower value used</td>
    </tr>

    <tr>
      <td>Property</td>
      <td>SFR attached/detached, townhouse, PUD, Fannie Mae or Freddie Mac warrantable condominiums, 2–4 units. Up to 10 acres (more case by case); agricultural use not allowed.</td>
    </tr>

    <tr>
      <td>Financed properties</td>
      <td>Maximum 10 financed properties.</td>
    </tr>

    <tr>
      <td>Gifts</td>
      <td>Primary residence only; 5% borrower contribution on purchase; not for reserves; donor must be immediate family, fiancé(e) or domestic partner.</td>
    </tr>

    <tr>
      <td>Business funds</td>
      <td>Self-employed borrowers must own 100% of the business; CPA letter required.</td>
    </tr>

    <tr>
      <td>RSU income</td>
      <td>Per Freddie Mac guide.</td>
    </tr>

    <tr>
      <td>Refinance seasoning</td>
      <td>Refinance of a mortgage less than 60 months old requires a net tangible benefit.</td>
    </tr>

    <tr>
      <td>Borrowers</td>
      <td>Permanent resident aliens with proof of lawful residence. Non-permanent resident aliens with a valid EAD or eligible visa class. Non-occupant co-borrowers are not eligible.</td>
    </tr>

    <tr>
      <td>Qualifying rate</td>
      <td>Note rate.</td>
    </tr>

    <tr>
      <td>Geographic</td>
      <td>Not eligible: Guam, Puerto Rico, U.S. Virgin Islands, Hawaii lava zones 1 and 2, Texas 50(a)(6).</td>
    </tr>

    <tr>
      <td>Exceptions</td>
      <td>Not permitted.</td>
    </tr>
  </tbody>
</table>

### 6.5 Pylon x PennyMac

DU or LPA jumbo with the highest loan amounts, agency-style gifts and business assets, and a 50% DTI option for fixed-rate primary loans.

<table>
  <colgroup>
    <col width="173" />

    <col width="712" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>AUS</td>
      <td>DU Approve/Ineligible or LPA Accept/Ineligible for loan amount only. Maximum 4 borrowers.</td>
    </tr>

    <tr>
      <td>Loan amounts</td>
      <td>Primary 1-unit purchase / rate/term \$3,500,000; 2-unit \$3,000,000\
      Primary cash-out: 1-unit \$3,000,000; 2-unit \$2,000,000\
      Second home 1-unit: \$3,000,000; cash-out \$2,000,000\
      Investment: 1-unit purchase \$2,500,000; 1–2 unit rate/term \$2,500,000; cash-out \$1,500,000</td>
    </tr>

    <tr>
      <td>DTI</td>
      <td>50% for fixed-rate, primary residence, max 80% CLTV and max \$2,000,000. Otherwise 45%.</td>
    </tr>

    <tr>
      <td>Reserves</td>
      <td>Per program matrix by loan amount (3 to 24 months PITIA). Business assets not eligible.\
      Other financed properties: 6 months each (1–6) or 8 months each (7–10) when aggregate UPB > \$1,000,000.</td>
    </tr>

    <tr>
      <td>Credit</td>
      <td>No frozen bureaus; unfreeze and rerun AUS. 7–10 financed properties: minimum 720 score.</td>
    </tr>

    <tr>
      <td>Derogatory credit</td>
      <td>7 years for all major events (bankruptcy, foreclosure, short sale, deed-in-lieu).</td>
    </tr>

    <tr>
      <td>Appraisal</td>
      <td>Purchase: two appraisals > \$3,000,000. Refinance: two appraisals > \$2,000,000 (lower value)\
      Single-appraisal loans need a secondary valuation before note date: CU and LCA \< 2.5, or AVM ≥ 90% with FSD \< 13%, or CDA ≥ 90%, or supporting field review\
      No waivers; unpermitted additions not eligible; ADUs permitted (SFR) when permitted and zoned</td>
    </tr>

    <tr>
      <td>Property</td>
      <td>SFR, 2-unit, PUD, Agency-eligible low- and high-rise condos, age-restricted communities, rural residential. Agricultural zoning only ≤ 5 acres with no agricultural use or outbuildings.</td>
    </tr>

    <tr>
      <td>Investment property</td>
      <td>Seller concessions max 2%. Turn-key investment arrangements not eligible.</td>
    </tr>

    <tr>
      <td>Cash-out</td>
      <td>Maximum \$500,000.</td>
    </tr>

    <tr>
      <td>Gifts</td>
      <td>Per AUS/Agency; not on investment; no gifts of equity; no wedding gifts; donor cannot be the seller.</td>
    </tr>

    <tr>
      <td>Business funds</td>
      <td>Eligible for down payment and closing costs per Agency; not for reserves.</td>
    </tr>

    <tr>
      <td>Borrowers</td>
      <td>Permanent resident aliens with proof of residence. Non-permanent resident aliens with two years of U.S. returns and visa renewal history. Non-occupant co-borrowers must meet the gift-donor relationship and have a reasonable housing payment (no rent-free).</td>
    </tr>

    <tr>
      <td>Geographic</td>
      <td>Illinois land trusts and Texas 50(a)(6) not eligible.</td>
    </tr>
  </tbody>
</table>

## 7. Early payment default, early payoff and principal reductions

These terms apply to every loan Pylon purchases, unless otherwise provided in the transaction documents. Repurchase pricing, indemnification amounts and premium refunds are set out in your subscription agreement with Pylon.

### Early payment default (EPD)

<table>
  <colgroup>
    <col width="253" />

    <col width="136" />

    <col width="511" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Applicable</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Agency loans</td>
      <td>Always</td>
      <td>A conforming or high balance loan is an early payment default if any of the first four monthly payments due after Pylon's purchase date becomes 90 or more days delinquent.</td>
    </tr>

    <tr>
      <td>AUS Jumbo loans</td>
      <td>Always</td>
      <td>An AUS Jumbo loan is an early payment default if any of the first four monthly payments due after Pylon's purchase date becomes 30 or more days delinquent.</td>
    </tr>

    <tr>
      <td>Payments due before purchase</td>
      <td>Always</td>
      <td>Payments due before Pylon's purchase date do not count toward satisfying the EPD period.</td>
    </tr>

    <tr>
      <td>Remedy</td>
      <td>Agreement specific</td>
      <td>Any EPD repurchase or indemnification remedy applies only to the extent set out in the applicable Loan Purchase Agreement or other governing agreement.</td>
    </tr>
  </tbody>
</table>

### Early payoff (EPO)

<table>
  <colgroup>
    <col width="210" />

    <col width="124" />

    <col width="566" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Applicable</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Early payoff period</td>
      <td>Always</td>
      <td>A loan is an early payoff if it is paid in full within 180 days of Pylon's purchase date, as set out in the subscription agreement.</td>
    </tr>

    <tr>
      <td>Recently listed properties</td>
      <td>Always</td>
      <td>If the property was listed for sale in the 30 days before application, the early payoff period is one year.</td>
    </tr>

    <tr>
      <td>Remedy</td>
      <td>Always</td>
      <td>The correspondent refunds the premium set out in the subscription agreement.</td>
    </tr>
  </tbody>
</table>

### Principal reductions and recasts

<table>
  <colgroup>
    <col width="146" />

    <col width="117" />

    <col width="631" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Applicable</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Large paydowns</td>
      <td>Always</td>
      <td>A cumulative principal paydown of more than 30% of the original principal balance within 180 days of Pylon's purchase date, including a paydown made for a recast, is treated as an early payoff. The amount owed is set out in the subscription agreement.</td>
    </tr>

    <tr>
      <td>Recasts</td>
      <td>Always</td>
      <td>Borrowers request a recast from the loan's servicer, not from Pylon. Servicer minimums, fees and eligibility apply, and a recast paydown counts toward the large paydown rule above.</td>
    </tr>
  </tbody>
</table>

### Non-solicitation

<table>
  <colgroup>
    <col width="140" />

    <col width="131" />

    <col width="613" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Applicable</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Non-solicitation</td>
      <td>Always</td>
      <td>The correspondent may not actively solicit a borrower to refinance or prepay a loan sold to Pylon during the applicable early payoff (EPO) period. Promotions undertaken by Correspondent which are directed to the general public at large, and do not target, in whole or in part, a borrower of a closed Loan, including, without limitation, mass mailing based on commercially acquired mailing lists, newspaper, radio, and television advertisements shall not constitute solicitation.  Any payoff during the applicable EPO period remains subject to the EPO protections in the agreement.</td>
    </tr>
  </tbody>
</table>

> [!NOTE]
>
> If you know a borrower plans to pay off, refinance or make a large paydown soon after closing, tell your account manager by ticket before the loan is locked.

## 8. Submission and documentation standards

These standards apply to every loan, in addition to Agency documentation requirements.

<table>
  <colgroup>
    <col width="265" />

    <col width="123" />

    <col width="485" />
  </colgroup>

  <thead>
    <tr>
      <th>Topic</th>
      <th>Applicable</th>
      <th>Requirement</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>Screenshots and online printouts</td>
      <td>Always</td>
      <td>Any document printed or captured from a website (account statements, VOE portals, insurance declarations, HOA, tax and licensing lookups) must show the full URL, the date and time captured, the institution name and the account holder name. Screenshots without a visible URL are not accepted.</td>
    </tr>

    <tr>
      <td>Document legibility</td>
      <td>Always\
      **Confirm**</td>
      <td>Documents must be complete, legible, include all pages (including blank pages referenced as "page x of y") and be free of alteration.</td>
    </tr>

    <tr>
      <td>Vesting</td>
      <td>Always\
      **Confirm**</td>
      <td>Proposed vesting must be entered on the loan before closing documents are requested and must match title and the borrowers on the loan (one trust maximum; no entity vesting).</td>
    </tr>

    <tr>
      <td>AUS findings</td>
      <td>Always</td>
      <td>The final AUS run must match the final loan terms, income, assets and credit.</td>
    </tr>

    <tr>
      <td>Changes after lock</td>
      <td>Always</td>
      <td>Report any change to loan amount, value, occupancy, program or credit as soon as it is known. Changes are re-priced under the [Rate lock policy](https://docs.pylon.mortgage/rate-lock-policy.md).</td>
    </tr>

    <tr>
      <td>Borrower or property change</td>
      <td>Always</td>
      <td>A change of borrower or subject property requires a new loan registration and a new lock.</td>
    </tr>
  </tbody>
</table>

> [!NOTE]
>
> Most screenshot rejections are for a missing URL or date. Capture the full browser window, including the address bar, rather than cropping to the page content.

## 9. Planned enhancements

Pylon is continuing to expand what correspondents can do through Command Center. The enhancements below are on Pylon's roadmap. Until each one is released, the current requirement in the section shown continues to apply. Pylon will announce each release to correspondents and update this guide when it goes live.

| Enhancement | What it will add | Current requirement |
| - | - | - |
| Electronic closings | Hybrid and full eClosings, eNotes and remote online notarization (RON). | Section 4, Closing method |
| Expanded trust vesting | Vesting in more than one inter vivos revocable trust. | Section 4, Vesting in a trust |
| Land trusts | Eligible land trust vestings. | Section 4, Land trusts |
| Manufactured homes | Manufactured home financing, including MH Advantage and CHOICEHome. | Section 4, Manufactured homes |
| Construction-to-permanent | Single-close (one-time close) construction-to-permanent financing. | Section 4, Single-close construction-to-permanent |
| VantageScore 4.0 | Qualifying with VantageScore 4.0 credit scores. | Section 4, VantageScore 4.0 |
| Down payment assistance | Down payment assistance programs. | Section 4, Down payment assistance and secondary financing |

## 10. Frequently asked questions

> [accordion] Where can I find Pylon's buy box?
>
> In the Pylon Knowledge Base: [Pylon's Buy Box Overview](https://pylonlending.support.site/article/pylons-buybox-overview). Every loan must meet its product guidelines and also fall inside the buy box.

> [accordion] What does "Investor specific" mean, and how do I know if it applies to my loan?
>
> It marks a requirement that depends on the investor the loan is delivered to. Pylon confirms whether it applies at underwriting. If your loan has one of these characteristics, raise it with your account manager by ticket before registering it.

> [accordion] Can I use down payment assistance or a grant with HomeReady or Home Possible?
>
> No. DPA and grant programs of any kind are not supported, including with HomeReady and Home Possible.

> [accordion] Can a loan be manually underwritten if AUS returns Refer?
>
> No. Every loan needs an eligible DU or LPA recommendation. Pylon does not offer manual underwriting on any product.

> [accordion] Are appraisal waivers allowed?
>
> On conforming and high balance loans, value acceptance (DU) and ACE (LPA) are permitted when AUS offers them. AUS Jumbo programs require a full appraisal.

> [accordion] Can title vest in a trust or an LLC?
>
> Title may vest in one inter vivos revocable trust. Two or more trusts, land trusts and LLC or other entity vesting are not eligible.

> [accordion] Are temporary buydowns allowed?
>
> Yes, on 30-year terms with a minimum 660 credit score. They are not permitted on terms under 30 years (section 4) or on ARMs (section 5.1).

> [accordion] What is the maximum LTV for a non-permanent resident alien on a jumbo loan?
>
> 65% LTV/CLTV on every AUS Jumbo program, and on any loan that is not AUS-eligible.

> [accordion] Can a loan close electronically or by remote online notarization?
>
> Not yet. eClosings (full or hybrid), eNotes and RON are a planned enhancement (section 9). Today every loan closes in person with wet-ink signatures.

> [accordion] My borrower wants to recast after closing. What do I tell them?
>
> Recasts are handled by the loan's servicer, not Pylon. The borrower contacts the servicer for minimums, fees and how to request one. A paydown of more than 30% of the original balance within 180 days of purchase, including for a recast, is treated as an early payoff (section 7).

> [accordion] Can I request an exception to an overlay?
>
> Not unless the program allows it. Pylon x Bayview and Pylon x Bayview Plus consider single-loan variances, which must be approved before the loan is locked or submitted to underwriting.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.